HF-800 plastering machine product details

This machine is the ideal equipment for residential buildings, office buildings, houses indoor wall surface hardening plaster. Can wipe the wall, brick wall, concrete wall, hollow wall, light brick, unburned brick etc.. Application of gray: gray, white powder, cement powder, foam mortar, dry mortar, gypsum etc.. Plastering thickness below 25cm, wall height 4m below can be used.

HF-800 plastering machine features

The conveyor belt conveyor forward ash way up by 1, the machine can completely wipe the top (1 mm without leaving the conveying belt completely wipe the top). The conveyor belt can be in any position in the manual stop or for ash, to achieve a window on the door, above the plaster (Note: windows and doors must have at least 50cm of distance, because the conveyor belt from the top 45cm automatic stop for ash) can also cause the wall lack of ash after the two wipe up, can also send intermittent ash reduce the way up because of insufficient fill ash fly ash.

2, the plastering plate can change the angle of the rise of large angle plastering, drop even small angle cut with light pressure, to achieve the original underground machine, the only way to wipe out the vertical wall to ensure zero error and completely wipe the top, while other manufacturers from the top are 50cm cannot wipe, wipe board, the machine must die leave the wall to relax the fixed down (do dangerous). Can not guarantee the smooth surface of the wall has been wiped.

3, the use of hydraulic telescopic rod, and the top of the top, can be in ten seconds and fix the machine, and the chassis force, mobile machine only needs to open the main rod like Jack, down by gravity, the foot automatically lift this way is the fastest and most secure.

4, with plate width according to the suite door (80cm) design, than the fuselage width of 3cm free access in the room, yin and yang angle fully in place, other manufacturers can not do.

5, behind the plastering plate fitted with two mini vibrator, you don't have to worry about the hollowing and scratches the wall of force.

6, the machine is assembled through a sealed universal wheel, you can easily move to any place you want to go.

7, completely imitate the ingenious design. Wipe the plate and the wall plastering plastering plate behind the formation of point of view, there are two vibrators, rising when the vibrator and the conveyor belt conveyor belt Everfount opened at the same time, the ash to wipe mouth, from the top 45cm conveyor belt automatic stop for ash, because through calculation, wipe ash has enough to wipe the top plate, with automatic change the top view, automatic or manual, automatic stop in the end.