Finishing machine product details

Finishing machine is mainly used for road surface. The floor (ground) floor, municipal engineering, airport and other smooth concrete surface and light pressure, improve the compactness of the place, wear resistance. This machine has the advantages of convenient use, time saving, labor saving, high efficiency and other characteristics, smooth and light pressure efficiency is dozens of times of the manual work.

Finishing machine product features

The gear box 1, turbine with large torque, durable, stable work, uniform speed and other advantages, to ensure smooth quality, prolong the working life of the machine.

2, remote throttle switch and flameout switch to increase the safety of the work.

3, handle machine transported to the site of operation more convenient.

4, the fuselage is small, easy to apply, fill the small space can not enter the defect.

Using the method of finishing machine

1, start the finishing machine, operating handle.

2, hold the joystick, so that the body to maintain balance.

3, finishing machine work, must hold the trowel, work on the floor should timely adjust the direction of the machine, so as not to lose control.

4, first rough grinding, fine grinding. After the bottom plate rough grinding, fine grinding to remove the ground for grinding, fine grinding with a spatula.

Finishing machine technical parameters

Model: WH60

Working diameter: 600mm

Speed: 50-100rpm

Blade adjustment range: 0-15 degrees

Size: 68*83*74