Rail lubricator
2016-12-23 10:43 Click：times
Rail lubricator product details
Rail lubricator consists of sensor, controller, motor, grease pump, oil tank, a few parts of the tubing and an oiling plate, usually installed in the railway track with small radius curve at the starting point. Users can according to the curve radius, the length of the curve, the vehicle type intelligent controller through the man-machine interface and flexible set out oil lubricator, oil oil time and frequency. The wheel sensor and oiling plate are mounted on the inner side of a rail, when the train passes the sensor to the controller sends a signal. According to the travel time and setting value, the intelligent controller can control the operation time and action frequency of the grease pump, optimize the oil output, oil output time and oil frequency, and achieve the best lubricating effect. Grease by oiling plate into oil evenly on the top of the size of the Pearl oil plate, when the stick in the wheel rim when a train passes, then spread evenly to the rail train will pass through the inner side (outer rail). A layer of oil film between the inner surface of the wheel and the rail makes the friction between the two wheels change from dry friction to oil lubricated friction, reduces the friction coefficient and reduces the friction force of the rail biting when the train turns. In order to reduce the abrasion of wheel and rail, significantly reducing traffic noise, reduce the vibration of the train. Because the oil film is not on the rail walking surface, the braking distance and the braking time of the train can not be affected.
The product has been exported to the United States, France, Canada, Indonesia, Russia, Vietnam, Australia, South Korea, Iran and other countries, access to customer acclaim.
TAG：
- 上一篇：A hand lifting machine
- 下一篇：SYFA-20