Horizontal switch product details

The switch into manual horizontal switch according to different operation modes, manual spring operating device, vertical manual switches, according to the work requirements are divided into manual and electric switchman switchman two. It uses the spring tension to switch the switch to the fixed position and keeps it in the fixed position. Apply to prone to "fork fault" under the situation of turnout, once the fork will not damage equipment. It will be locked in the shaft locking hole penetrated into the base on the plus lock, to lock in turnout for anti state, to facilitate a bifurcated traffic safety.

Horizontal switch features

1 handle length scalable 290MM, when the turnout conversion little resistance, can shorten the length of the handle, on the other hand, extend the length of the handle.

2 in order to reduce the handle pulling stroke, the handle can be rotated 180 degrees to facilitate human operation.

3 the expansion and rotation are all carried by the two spring pins on the handle sleeve, and then are adjusted to fall.

4 in order to overcome the resistance, the handle head design for ball slide structure the structure of the flexible.

5 right angle rotation center spindle, equipped with rolling bearings, improve the product life and accuracy.

6 each rotary shaft hole, are equipped with self-lubricating material lining.

The connection between the 7 pull rod and the switch adopts a fine adjustment device, and the switch opening and the sticking condition can be adjusted without dismantling the connecting pin after the installation.

The product has been exported to the United States, France, Canada, Indonesia, Russia, Vietnam, Australia, South Korea, Iran and other countries, access to customer acclaim.