Rail gap adjuster product details

Rail gap adjuster is used to adjust the gap of rail joint. Due to climate change and driving factors, the gap of rail often changes. In order to ensure traffic safety, maintenance departments have certain requirements on the rail joint gap, so we must move on rails. Rail gap regulator thrust, it can be used on 50Kg/m, 60Kg/m, 75Kg/m rail complete rail task.

Technical parameters of rail gap adjuster

1 maximum thrust 250KN

2 maximum stroke of working cylinder 145mm

3 working oil pressure 43mpa

4 oil pump piston each working cycle piston displacement 1.7mm

5 the maximum operating force of the handle 260N

6 maximum rail gap for each adjustment 140mm

7 shape size 850 long wide 300 high 290

8 net weight 55Kg.

Rail gap adjuster operating procedure

1 push rail gap adjuster to the adjusted rail joint.

2 pull moving frame, the two chuck (Xie Tie) falls on the rail, the rail to rail and cable.

3 clockwise tighten the valve rocking lever, the input of the high-pressure oil cylinder.

4 each time after adjustment should be in order to unscrew the valve, and then release the working cylinder in the oblique iron spring return.

5 shake the rack to support the strike wheel on the rail, moved to second working points.

The product has been exported to the United States, France, Canada, Indonesia, Russia, Vietnam, Australia, South Korea, Iran and other countries, access to customer acclaim.