YCD-4 type hydraulic switch tamping machine details

YCD-4 type hydraulic switch tamping machine is special railway maintenance machinery and equipment, mainly used in the section with a turnout sleeper bottom ballast tamping tamping effect, it can be considered for the ballast line. Applicable to various types of 43kg/m ~ 75kg /m rail ballast ballast turnout tamping. Can also be used for tamping operation outside the ordinary line switch. This machine with advanced performance, can meet the requirements of various types of turnout tamping technology.

Applicable YCD-4 type hydraulic switch tamping machine range and advantages

YCD-4 type hydraulic switch tamping machine is mainly in order to meet the need of heavy rail structure and heavy haul, high-speed passenger transport of high density and design. The application of mechanical switch tamping operation, can completely replace the traditional line maintenance equipment, to overcome the traditional line maintenance tools high labor intensity, low working efficiency, poor quality of tamping. YCD-4 type hydraulic switch tamping machine that has certain ballast density and elastic through the turnout tamping, enhance the overall stability and turnout smoothly, can not only prolong the service life of the switch, also can prolong the service life of the wheel, the train runs more smoothly, reducing the cost of railway transportation. The machine has a tamping device of light weight, flexible operation, low failure rate, many advantages of good quality of tamping.

YCD-4 type hydraulic switch tamping machine features

1, YCD-4 type hydraulic switch tamping machine with high performance and high quality gasoline powered, with stable high horsepower output, low fuel consumption, less consumption of lubricating oil, the quality of small, low noise characteristics. Can also be based on user needs motor or diesel powered.

2, the structure of the clamp and separate tamping device: tamping device in a walking frame on the level of lateral movement, the tamping pick in different position switch tamping.

3, using detachable clamp hinged swing type double hydraulic cylinder clamp structure, quick action, convenient on operation, convenient operation, the switch point, a guardrail, track fishplate joint any position clamp rail, can make the pickaxe inserted in tamping Road, small amount of cement hardening under the condition of.

4, the centrifugal block friction clutch structure, transmission torque, reduce transmission loss, improve the transmission efficiency.

5, vibration box with built-in eccentric iron type, vibration box temperature rise low, safe and reliable.

6, four pieces of tamping machine for tamping device for a group to work at the same time, the insertion force, each tamping device consists of a pair of pick arm, can be in any position at the same time, turnout tamping operation, each of the tamping pick two cylinder driving, clamp strength, tamping of good quality and high efficiency.

7, switch tamping, without moving the tongue, can realize the song shares shares, turnout straight line.

8, tamping device part and rail tongs hydraulic circuit with quick change connector, easy disassembly, rapid road.

9, pick up into the ballast depth by 90mm under the pillow.

YCD-4 type hydraulic switch tamping machine technical parameters

1 internal combustion engine power: 6.6kW

2 vibration frequency: 60Hz ~ 67Hz

3 exciting force: 31.5kN

4 working system oil pressure: 4MPa

5 work efficiency: 260 pieces / hour

6 external dimensions: 1350 x 520 x 1650 (mm)

7 host quality: 300kg/ table.

The product has been exported to the United States, France, Canada, Indonesia, Russia, Vietnam, Australia, South Korea, Iran and other countries, access to customer acclaim.