Product details of CPH-2100 turnout switch unit

CPH-2100 type turnout switch unit is based on the needs of the construction site, no lifting equipment for the site or the narrow site and the development of new products. The utility model adopts the separation structure of the starting oil cylinder and the pump station, and the oil pump and the starting oil are connected with the quick change joint by the oil pipe, which is convenient for manual handling. The utility model can be used for the integral lifting or landing of a common switch, a speed regulating switch and a high speed switch, such as a single switch, a compound switch, a crossover switch, a combined switch, etc..

Technical parameters of CPH-2100 turnout switch unit

Power: GX270 gasoline engine (each pump station to drive 4 sets of oil cylinder)

GX160 gasoline engine (each pump station is driven by 2 oil cylinders)

Power: 6.6kW (each pump station to drive 4 sets of road cylinder)

4.0kW (each pump station to drive 2 sets of track cylinder)

Fuel consumption rate: 310g/kW.h

Lubricating oil capacity: 1.12L

Single up dint: 131.8kN

Single dial dint: 93kN

Maximum state: 2100kN (16 lifting cylinder)

1845kN (14 sets of lifting cylinder)

A maximum starting height: 500mm/650mm/800mm

Single cylinder quality (including hydraulic oil):80kg/98kg/111kg

The quality of hydraulic pump (including hydraulic oil): less than 115KG (each pump drive 4 lifting cylinder)

85kg (each pump drive 2 lifting cylinder)

Rated working pressure: 16.8MPa

Work flow: 20L/min

Hand pressure pump flow: 75mL/ reciprocating.