T5873
2021-09-24 16:55 Click：times
| VCC lock frame and bottom plate fixing bolts | M20× 40 GB/T5873(gaswasher) (turnout) |
| Elastic cushion under the ballast VCC plate | 900 × 300 × 9 (for method turnout) |
| Turn shaft | Bar support 198 × 300 × 80 CD01-17 combined with CD01-18 (bifurcation) |
| Turn shaft | Bar support 260 × 255 × 80 CD01-17 combined with CD01-18 (bifurcation) |
| Turn shaft | Bar support 300 × 110 × 80 CD01-17 combined with CD01-18 (bifurcation) |
| Turn shaft | Bar support 300 × 232 × 120 CD01-17 combined with CD01-19 (turnout) |
| Turn shaft | Bar support 300 × 157 × 120 CD01-17 combined with CD01-19 (turnout) |
| Turn shaft | Bar support 300 × 115 CD01-17 combined with CD01-19 (turnout) |
| Turn shaft | Bar support 200 × 200 CD01-17 combined with CD01-20 (turnout) |
| Lubrication shaft | φ24 (fork) |
| Lubrication shaft | φ25 (method turnout) |
| Type C arm components | ϟ (including pointed rail connection bolt level gasket, each wear-resistant slider) |
| VCC pointed rail connection bolts | M16× 95 (including nut washer) (for turnout) |
| End rod | 200-25 (method turnout) |
| End rod | 200-30 (method turnout) |
| End rod | 295-30 (method turnout) |
| Error connecting rod | φ41/φ25(bifurcation of embedded INA rotor in the fixed end) |
| Adjust the cylinder | Adjustable rod 2140 (including coupling pipe, range adjustment rod, adjustment rod, etc.) (turnout) |
| Roll wheel adjustment sheet | 177×24×0.5mm(method bifurcation) |
| Roll wheel adjustment sheet | 177 × 24 × 1mm(bifurcation) |
| Roll wheel adjustment sheet | 177 × 24 × 2mm(bifurcation) |
| Roll wheel adjustment sheet | 177 × 24 × 3mm(bifurcation) |
| T rod adjustment sheet | 244×56×0.5mm(method bifurcation) |
| T rod adjustment sheet | 244 × 56 × 1mm(bifurcation) |
| T rod adjustment sheet | 244 × 56 × 2mm(bifurcation) |
| Hollow hammer head bolt | M27× 79 (VCC for horizontal connection to basic rail) (bifurcation) |
| High-speed turnout insulation pipe | Enhanced nylon 16 × 32mm(fork) |
| High-speed turnout insulation pipe | Enhanced nylon 24-30 × 32mm(fork) |
| High-speed turnout-insulated gasket | Enhanced nylon 22.5 × 65mm(bifurcation) |
| High-speed turnout-insulated gasket | Enhanced Nylon 32 × 65mm(bifurcation) |
| Type C-head wear-resistant slider | Side mounting (for turnout) |
| Lower support block of the C-type arm | Lower installation (for turnout) |
| Plastic sleeve for VCC pad | Plastic slip cover (for normal turnout) |
| The deflection protection cover | 540mm bifurcation fittings |
| The deflection protection cover | 550mm bifurcation fittings |
| The deflection protection cover | 560mm bifurcation fittings |
| The deflection protection cover | 580mm bifurcation fittings |
| The deflection protection cover | 600mm bifurcation accessories |
| The deflection protection cover | 630mm bifurcation fittings |
| The deflection protection cover | 650mm bifurcation fittings |
| Deflection protection cover retaining bolts | M24× 161 (including washer, disc spring, insulated sleeve) (bifurcation) |
| Chap pillow casing | M24 for normal fork fixed deflection protection cover bolts |
| Lock-up inspector (with drive finger) | Forfork pointed rail VCC |
| Lock-up inspector (with drive finger) | Forfork track VPM |
| Closure Inspector | Forfork pointed rail PLV |
| Closure Inspector | Forfork track PLV |
| Case cover plate | Turting machine (MCEM91) |
| Cast iron chassis enclosure assembly | Internal use of fork switch machine (type MCEM91) |
| Torque locator | Internal use of fork switch machine (type MCEM91) |
| Motor assembly | Internal use of fork switch machine (type MCEM91) |
TAG：
- 上一篇：KT262-14-91
- 下一篇：AR23507